Independent wheel reference
BBS wheels: series, specifications and buying guides
An independent guide to BBS wheels, from the three-piece RS of the 1980s to forged FI-R and RI-A designs. Every series has its history, construction and identification notes, and 1026 part numbers have full size, offset, bolt pattern and centre bore data.
- 42series & models
- 1026part numbers
- 8guides

Series with specification tables
All seriesMore BBS models
Full list
BBS CC-RCast one-piece, concave face
BBS CH-RCast one-piece, 2010s
BBS CI-RCast one-piece, 2010s
BBS E88 motorsportMotorsport mesh, racing
BBS FIForged one-piece, 2010s
BBS FI-RForged one-piece, successor to FI
BBS LM-RRevised LM, 2010s onward
BBS RCCast one-piece, 1990s
BBS RE-VForged one-piece, Japan
BBS RE-V7Forged seven-spoke, Japan
BBS RGCast one-piece mesh, 1990s
BBS RG-RForged one-piece, Japan
Guides
All guides- A history of BBS wheels BBS started in 1970 in Schiltach, a small town in the Black Forest, making plastic body parts for cars.
- How to identify BBS wheels Most BBS wheels can be identified in a few minutes if you know where to look.
- Wheel fitment and offset explained PCD, ET offset, centre bore, hub rings, bolts versus nuts, seat types and load ratings, explained with worked examples for fitting BBS wheels correctly.
- Buying used BBS wheels Used BBS wheels are everywhere, and so are copies and wheels that have had a hard life.
- Refurbishing three-piece BBS wheels A three-piece wheel can be taken apart, and that is both its advantage and its risk when refurbishing.
- Forged versus cast BBS wheels BBS has made wheels by casting, by flow-forming and by forging, in one-piece and multi-piece forms.
- BBS in motorsport BBS made its name in racing before it was widely known on the street.
- Caring for BBS wheels Most damage to wheels comes from brake dust left too long, harsh cleaners and kerbs.
Reading a wheel specification
- Size is width × diameter in inches, for example 7x16 for a 7-inch-wide, 16-inch wheel.
- PCD (pitch circle diameter) is the bolt pattern: number of studs × the diameter of the circle they sit on, in millimetres, such as 5x112.
- Offset (ET) is the distance in millimetres from the wheel's centre line to its mounting face. A higher ET tucks the wheel further into the arch.
- Centre bore (CB) is the diameter of the hole that locates the wheel on the hub. A wheel with a larger bore needs hub-centric rings.
- Lip and barrel apply to multi-piece wheels such as the RS and RS II, built from a centre bolted to separate rim halves.
Most BBS wheels carry their part number, size and offset cast or stamped on the back of the centre. Matching that marking against the tables here is the quickest way to identify a used wheel. The fitment guide works through examples.


