
BBS LM series
BBS LM067
- Size7x17"
- PCD5x114.3
- OffsetET42
- Centre bore73 mm
- Lip0.5"
The BBS LM067 belongs to the LM range of two-piece mesh wheels. Size is 7J x 17.
The 5x114.3 bolt pattern of the BBS LM067 is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.
At ET42 the BBS LM067 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS LM067 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS LM067 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
No fitment figure is recorded for the BBS LM067. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS LM067, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM067 | 5x114.3 | 17 | 7 | 42 | 73 | 0.5" | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit