
BBS LM series
BBS LM070
- Size10x17"
- PCD5x114.3
- OffsetET50
- Lip2"
BBS LM070 is a part number from the LM range of two-piece mesh wheels. It is a 17-inch wheel, 10 inches wide.
The 5x114.3 bolt pattern of the BBS LM070 is the one used by many Japanese and Korean cars.
At ET50 the BBS LM070 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
Before fitting a 17-inch BBS LM070, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS LM070 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
No centre bore or fitment figure is recorded for the BBS LM070. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM070 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM070 | 5x114.3 | 17 | 10 | 50 | — | 2" | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit