
BBS LM series
BBS LM072
- Size9x17"
- PCD5x114.3
- OffsetET35
BBS LM072 is a part number from the LM range of two-piece mesh wheels. It measures 9x17 inches.
The 5x114.3 bolt pattern of the BBS LM072 is the one used by many Japanese and Korean cars.
At ET35 the BBS LM072 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
At 17 inches, the BBS LM072 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS LM072 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM072 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM072 | 5x114.3 | 17 | 9 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit