BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM074

  • Size8x17"
  • PCD5x114.3
  • OffsetET40
  • Centre bore73 mm
  • Lip1"

This page covers the BBS LM074, one wheel from the LM range of two-piece mesh wheels. It measures 8x17 inches.

On the BBS LM074, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.

At ET40 the BBS LM074 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 17 inches, the BBS LM074 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS LM074 multi-piece build: lip 1". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

No fitment figure is recorded for the BBS LM074. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS LM074, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM074 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM0745x114.317840731"———

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models