BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM080

  • Size8x18"
  • PCD5x114.3
  • OffsetET40

BBS LM080 is a part number from the LM family, often seen on European performance cars. It is an 18-inch wheel, 8 inches wide.

On the BBS LM080, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET40 is a high offset for the BBS LM080, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 18 inches, the BBS LM080 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No centre bore or fitment figure is recorded for the BBS LM080. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM080 came from and how it is built is on the BBS LM page.

Specifications

BBS LM080 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM0805x114.318840—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models