
BBS LM series
BBS LM095
- Size7.5x18"
- PCD5x114.3
- OffsetET45
This page covers the BBS LM095, one wheel from the LM, a two-piece mesh design with a deep polished lip. It measures 7.5x18 inches.
The 5x114.3 bolt pattern of the BBS LM095 is the one used by many Japanese and Korean cars.
At ET45 the BBS LM095 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
At 18 inches, the BBS LM095 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS LM095 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS LM overview covers the background of the BBS LM095 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM095 | 5x114.3 | 18 | 7.5 | 45 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit