
BBS LM series
BBS LM100
- Size10x18"
- PCD5x130
- OffsetET65
BBS LM100 is a part number from the LM range of two-piece mesh wheels. Size is 10J x 18 and is listed for Porsche.
The 5x130 bolt pattern of the BBS LM100 is the one used by Porsche and some Mercedes-Benz.
At ET65 the BBS LM100 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.
At 18 inches, the BBS LM100 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore figure is recorded for the BBS LM100. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM100 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM100 | 5x130 | 18 | 10 | 65 | — | — | — | Porsche | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit