BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM103

  • Size9x17"
  • PCD5x114.3
  • OffsetET48

This page covers the BBS LM103, one wheel from the LM, a two-piece mesh design with a deep polished lip. Size is 9J x 17.

On the BBS LM103, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

At ET48 the BBS LM103 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 17 inches, the BBS LM103 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS LM103 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS LM overview covers the background of the BBS LM103 and its siblings, their construction and buying tips.

Specifications

BBS LM103 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1035x114.317948—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models