
BBS LM series
BBS LM108
- Size8.5x17"
- PCD5x112
- OffsetET20
BBS LM108 is a part number from the LM family, often seen on European performance cars. It is a 17-inch wheel, 8.5 inches wide.
The 5x112 bolt pattern of the BBS LM108 is the one used by Audi, VW, Mercedes-Benz and later BMW.
The BBS LM108 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
At 17 inches, the BBS LM108 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS LM108 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM108, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM108 | 5x112 | 17 | 8.5 | 20 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit