BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM132

  • Size11x18"
  • PCD5x130
  • OffsetET56

BBS LM132 is a part number from the LM, a two-piece mesh design with a deep polished lip. It is an 18-inch wheel, 11 inches wide and is listed for Porsche.

On the BBS LM132, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz.

ET56 is a high offset for the BBS LM132, so it tucks well inside the arch, as front-drive and most modern cars need. An 11-inch rim normally takes tyres from about 275 to 325 mm wide.

At 18 inches, the BBS LM132 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore of the BBS LM132 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS LM132, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM132 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1325x130181156———Porsche—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models