
BBS LM series
BBS LM144
- Size10x18"
- PCD5x130
- OffsetET50
BBS LM144 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 10x18 inches and is listed for Porsche.
The 5x130 bolt pattern of the BBS LM144 is the one used by Porsche and some Mercedes-Benz.
At ET50 the BBS LM144 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
Before fitting an 18-inch BBS LM144, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore of the BBS LM144 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM144, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM144 | 5x130 | 18 | 10 | 50 | — | — | — | Porsche | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit