BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM151

  • Size13x18"
  • PCD6x114.3
  • OffsetET71

The BBS LM151 belongs to the LM range of two-piece mesh wheels. Size is 13J x 18 and is listed for Dodge Viper.

The 6x114.3 bolt pattern of the BBS LM151 sets which hubs it can bolt to.

At ET71 the BBS LM151 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 13-inch rim normally takes tyres from about 335 to 375 mm wide.

At 18 inches, the BBS LM151 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore of the BBS LM151 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM151 came from and how it is built is on the BBS LM page.

Specifications

BBS LM151 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1516x114.3181371———Dodge Viper—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models