BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM155

  • Size9.5x19"
  • PCD5x112
  • OffsetET32

The BBS LM155 belongs to the LM, a two-piece mesh design with a deep polished lip. It is a 19-inch wheel, 9.5 inches wide.

On the BBS LM155, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.

An offset of ET32 puts the BBS LM155 in the usual range for European saloons of its era. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.

Before fitting a 19-inch BBS LM155, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS LM155 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM155 came from and how it is built is on the BBS LM page.

Specifications

BBS LM155 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1555x112199.532—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models