BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM162

  • Size8.5x17"
  • PCD5x114.3
  • OffsetET55

BBS LM162 is a part number from the LM, a two-piece mesh design with a deep polished lip. Size is 8.5J x 17.

The 5x114.3 bolt pattern of the BBS LM162 is the one used by many Japanese and Korean cars.

ET55 is a high offset for the BBS LM162, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

Before fitting a 17-inch BBS LM162, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore or fitment figure is recorded for the BBS LM162. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM162 came from and how it is built is on the BBS LM page.

Specifications

BBS LM162 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1625x114.3178.555—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models