BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM166

  • Size9.5x19"
  • PCD5x120
  • OffsetET32

The BBS LM166 belongs to the LM, a two-piece mesh design with a deep polished lip. It is a 19-inch wheel, 9.5 inches wide and is listed for BMW.

On the BBS LM166, the 5x120 PCD is the one used by BMW and some Land Rover and Honda.

An offset of ET32 puts the BBS LM166 in the usual range for European saloons of its era. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

At 19 inches, the BBS LM166 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No centre bore figure is recorded for the BBS LM166. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS LM166, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM166 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1665x120199.532———BMW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models