BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM168

  • Size10x19"
  • PCD5x108
  • OffsetET52

The BBS LM168 belongs to the LM, a two-piece mesh design with a deep polished lip. Size is 10J x 19.

On the BBS LM168, the 5x108 PCD is the one used by Ford, Volvo, Jaguar and Peugeot.

ET52 is a high offset for the BBS LM168, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

At 19 inches, the BBS LM168 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS LM168 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS LM overview covers the background of the BBS LM168 and its siblings, their construction and buying tips.

Specifications

BBS LM168 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1685x108191052—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models