
BBS LM series
BBS LM175
- Size7.5x17"
- PCD4x100
- OffsetET25
BBS LM175 is a part number from the LM range of two-piece mesh wheels. It measures 7.5x17 inches.
The 4x100 bolt pattern of the BBS LM175 is the one used by older BMW, VW, Honda and Mazda.
An offset of ET25 puts the BBS LM175 in the usual range for European saloons of its era. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
Before fitting a 17-inch BBS LM175, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore and fitment of the BBS LM175 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM175, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM175 | 4x100 | 17 | 7.5 | 25 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit