
BBS LM series
BBS LM177
- Size10.5x18"
- PCD5x108
- OffsetET39
The BBS LM177 belongs to the LM, a two-piece mesh design with a deep polished lip. It measures 10.5x18 inches and is listed for Ferrari 360.
The 5x108 bolt pattern of the BBS LM177 is the one used by Ford, Volvo, Jaguar and Peugeot.
At ET39 the BBS LM177 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10.5-inch rim normally takes tyres from about 265 to 315 mm wide.
At 18 inches, the BBS LM177 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore of the BBS LM177 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM177 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM177 | 5x108 | 18 | 10.5 | 39 | — | — | — | Ferrari 360 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit