
BBS LM series
BBS LM179
- Size10.5x18"
- PCD5x108
- OffsetET30
BBS LM179 is a part number from the LM, a two-piece mesh design with a deep polished lip. It is an 18-inch wheel, 10.5 inches wide and is listed for Ferrari 360.
On the BBS LM179, the 5x108 PCD is the one used by Ford, Volvo, Jaguar and Peugeot.
An offset of ET30 puts the BBS LM179 in the usual range for European saloons of its era. Tyre widths of roughly 265-315 mm are the usual match for a 10.5-inch rim.
Before fitting an 18-inch BBS LM179, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore of the BBS LM179 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM179 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM179 | 5x108 | 18 | 10.5 | 30 | — | — | — | Ferrari 360 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit