BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM185

  • Size8.5x20"
  • PCD5x114.3
  • OffsetET36
  • Centre borePFS mm

BBS LM185 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 8.5x20 inches.

On the BBS LM185, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.

At ET36 the BBS LM185 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

At 20 inches, the BBS LM185 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No fitment figure is recorded for the BBS LM185. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM185 came from and how it is built is on the BBS LM page.

Specifications

BBS LM185 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1855x114.3208.536PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models