BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM222

  • Size8.5x18"
  • PCD5x120
  • OffsetET47
  • Centre borePFS mm

BBS LM222 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 8.5x18 inches.

The 5x120 bolt pattern of the BBS LM222 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

ET47 is a high offset for the BBS LM222, so it tucks well inside the arch, as front-drive and most modern cars need. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting an 18-inch BBS LM222, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No fitment figure is recorded for the BBS LM222. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM222 came from and how it is built is on the BBS LM page.

Specifications

BBS LM222 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2225x120188.547PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models