BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM225

  • Size9x20"
  • PCD5x120
  • OffsetET15
  • Centre borePFS mm

This page covers the BBS LM225, one wheel from the LM, a two-piece mesh design with a deep polished lip. Size is 9J x 20 and is listed for BMW.

On the BBS LM225, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

The BBS LM225 uses ET15, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 20 inches, the BBS LM225 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

For the history behind the BBS LM225, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM225 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2255x12020915PFS——BMW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models