BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM232

  • Size10.5x20"
  • PCD5x120
  • OffsetET15
  • Centre borePFS mm

The BBS LM232 belongs to the LM, a two-piece mesh design with a deep polished lip. Size is 10.5J x 20.

The 5x120 bolt pattern of the BBS LM232 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

The BBS LM232 uses ET15, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 10.5-inch rim normally takes tyres from about 265 to 315 mm wide.

At 20 inches, the BBS LM232 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The fitment of the BBS LM232 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM232 came from and how it is built is on the BBS LM page.

Specifications

BBS LM232 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2325x1202010.515PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models