BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM244

  • Size9.5x20"
  • PCD5x114.3
  • OffsetET42
  • Centre borePFS mm

The BBS LM244 belongs to the LM, a two-piece mesh design with a deep polished lip. It measures 9.5x20 inches.

The 5x114.3 bolt pattern of the BBS LM244 is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.

ET42 is a high offset for the BBS LM244, so it tucks well inside the arch, as front-drive and most modern cars need. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

Before fitting a 20-inch BBS LM244, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS LM244 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS LM244, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM244 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2445x114.3209.542PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models