
BBS LM series
BBS LM250
- Size9x19"
- PCD5x112
- OffsetET42
- Centre borePFS mm
BBS LM250 is a part number from the LM range of two-piece mesh wheels. It measures 9x19 inches.
On the BBS LM250, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the PFS mm centre bore decides whether you need hub-centric rings.
ET42 is a high offset for the BBS LM250, so it tucks well inside the arch, as front-drive and most modern cars need. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
Before fitting a 19-inch BBS LM250, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The fitment of the BBS LM250 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM250 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM250 | 5x112 | 19 | 9 | 42 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit