
BBS LM series
BBS LM266
- Size10x18"
- PCD5x130
- OffsetET65
- Centre bore71.6 mm
The BBS LM266 belongs to the LM family, often seen on European performance cars. It is an 18-inch wheel, 10 inches wide and is listed for Porsche.
On the BBS LM266, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
ET65 is a high offset for the BBS LM266, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 18 inches, the BBS LM266 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
More on where the BBS LM266 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM266 | 5x130 | 18 | 10 | 65 | 71.6 | — | — | Porsche | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit