BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM286

  • Size10x18"
  • PCD5x130
  • OffsetET50
  • Centre bore71.6 mm

BBS LM286 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 10x18 inches and is listed for Porsche.

On the BBS LM286, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

ET50 is a high offset for the BBS LM286, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

At 18 inches, the BBS LM286 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

More on where the BBS LM286 came from and how it is built is on the BBS LM page.

Specifications

BBS LM286 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2865x13018105071.6——Porsche—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models