
BBS RF series
BBS RF003
- Size8x17"
- PCD4x100
- OffsetET19
- Centre bore57 mm
- Lip1.5"
- Barrel6"
This page covers the BBS RF003, one wheel from the BBS RF range. It is a 17-inch wheel, 8 inches wide and is listed for BMW 3/1.
The 4x100 bolt pattern of the BBS RF003 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
The BBS RF003 uses ET19, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 17-inch BBS RF003, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RF003 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RF003 came from and how it is built is on the BBS RF page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RF003 | 4x100 | 17 | 8 | 19 | 57 | 1.5" | 6" | BMW 3/1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit