
BBS RF series
BBS RF011
- Size9.5x17"
- PCD5x120
- OffsetET13
- Centre bore72.5 mm
- Lip2.5"
- Barrel6.5"
BBS RF011 is a part number from the BBS RF family of wheels. It measures 9.5x17 inches and is listed for BMW 5/H, 7/1 HA.
On the BBS RF011, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
With ET13 on the BBS RF011, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.
At 17 inches, the BBS RF011 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RF011: lip 2.5", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RF011 came from and how it is built is on the BBS RF page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RF011 | 5x120 | 17 | 9.5 | 13 | 72.5 | 2.5" | 6.5" | BMW 5/H, 7/1 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit