
BBS RS series
BBS RS010
- Size7x15"
- PCD5x112
- OffsetET38
- Centre bore66.5 mm
- Lip5/8"
- Barrel5 7/8"
BBS RS010 is a part number from the classic three-piece RS family. Size is 7J x 15 and is listed for MB 201.
On the BBS RS010, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
At ET38 the BBS RS010 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 15-inch BBS RS010, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS010: lip 5/8", barrel 5 7/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS010 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS010 | 5x112 | 15 | 7 | 38 | 66.5 | 5/8" | 5 7/8" | MB 201 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit