
BBS RS series
BBS RS026
- Size10x16"
- PCD5x120.65
- OffsetET36
- Centre bore70.3 mm
- Lip2"
- Barrel7.5"
BBS RS026 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 10x16 inches and is listed for Chevrolet Corvette HA.
The 5x120.65 bolt pattern of the BBS RS026 is the one used by Chevrolet Corvette and Camaro; the 70.3 mm centre bore decides whether you need hub-centric rings.
ET36 is a high offset for the BBS RS026, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 16 inches, the BBS RS026 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS026: lip 2", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS026, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS026 | 5x120.65 | 16 | 10 | 36 | 70.3 | 2" | 7.5" | Chevrolet Corvette HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit