
BBS RS series
BBS RS028
- Size7x16"
- PCD5x108
- OffsetET11
- Centre bore58 mm
- Lip1.5"
- Barrel5"
BBS RS028 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 7x16 inches and is listed for Ferrari VA 308, 328.
The 5x108 bolt pattern of the BBS RS028 is the one used by Ford, Volvo, Jaguar and Peugeot; the 58 mm centre bore decides whether you need hub-centric rings.
The BBS RS028 has a low ET11 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 16-inch BBS RS028, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS028 multi-piece build: lip 1.5", barrel 5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS028, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS028 | 5x108 | 16 | 7 | 11 | 58 | 1.5" | 5" | Ferrari VA 308, 328 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit