
BBS RS series
BBS RS061
- Size8x16"
- PCD5x120
- OffsetET20
- Centre bore72.5 mm
- Lip1.5"
- Barrel6"
The BBS RS061 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 16 and is listed for BMW M3, M5, 5/1, 6Cs, 7, 7/1.
On the BBS RS061, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
An offset of ET20 puts the BBS RS061 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
At 16 inches, the BBS RS061 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS061: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS061, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS061 | 5x120 | 16 | 8 | 20 | 72.5 | 1.5" | 6" | BMW M3, M5, 5/1, 6Cs, 7, 7/1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit