
BBS RS series
BBS RS100
- Size9x15"
- PCD4x100
- OffsetET3
- Centre bore57 mm
- Lip3"
- Barrel5.5"
The BBS RS100 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 9x15 inches and is listed for Opel GT HA.
On the BBS RS100, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
The BBS RS100 has a low ET3 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
Before fitting a 15-inch BBS RS100, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS100 multi-piece build: lip 3", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS100 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS100 | 4x100 | 15 | 9 | 3 | 57 | 3" | 5.5" | Opel GT HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit