
BBS RS series
BBS RS135
- Size7x16"
- PCD4x108
- OffsetET36
- Centre bore65 mm
- Lip0.5"
- Barrel6"
The BBS RS135 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7J x 16 and is listed for Saab 9000.
The 4x108 bolt pattern of the BBS RS135 is the one used by Ford, Peugeot and Citroën; the 65 mm centre bore decides whether you need hub-centric rings.
ET36 is a high offset for the BBS RS135, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 16-inch BBS RS135, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS135 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS135, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS135 | 4x108 | 16 | 7 | 36 | 65 | 0.5" | 6" | Saab 9000 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit