BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS144

  • Size11x15"
  • PCD5x130
  • OffsetET-30
  • Centre bore71.6 mm
  • Lip5 1/8"
  • Barrel5 3/8"

The BBS RS144 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 11x15 inches and is listed for Porsche 911, 944.

On the BBS RS144, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

With ET-30 on the BBS RS144, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 275-325 mm are the usual match for an 11-inch rim.

At 15 inches, the BBS RS144 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS144 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS144 came from and how it is built is on the BBS RS page.

Specifications

BBS RS144 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1445x1301511-3071.65 1/8"5 3/8"Porsche 911, 944—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models