BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS155

  • Size7x15"
  • PCD4x114.3
  • OffsetET30
  • Centre bore71.6 mm
  • Lip5/8"
  • Barrel5 7/8"

BBS RS155 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 7x15 inches and is listed for Saab 900.

The 4x114.3 bolt pattern of the BBS RS155 is the one used by older Nissan and Mitsubishi; the 71.6 mm centre bore matches Porsche hubs.

The BBS RS155 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

At 15 inches, the BBS RS155 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS155: lip 5/8", barrel 5 7/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS155 came from and how it is built is on the BBS RS page.

Specifications

BBS RS155 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1554x114.31573071.65/8"5 7/8"Saab 900—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models