
BBS RS series
BBS RS158
- Size8x16"
- PCD5x130
- OffsetET49
- Centre bore71.6 mm
- Lip1"
- Barrel6.5"
This page covers the BBS RS158, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 16 and is listed for Porsche 944 ab Bj.9/86, 964 VA.
On the BBS RS158, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
ET49 is a high offset for the BBS RS158, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
At 16 inches, the BBS RS158 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS158 multi-piece build: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS158 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS158 | 5x130 | 16 | 8 | 49 | 71.6 | 1" | 6.5" | Porsche 944 ab Bj.9/86, 964 VA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit