
BBS RS series
BBS RS166
- Size13x15"
- PCD4x100
- OffsetET-48
- Centre bore60 mm
- Lip7"
- Barrel5.5"
This page covers the BBS RS166, one wheel from the classic three-piece RS family. It is a 15-inch wheel, 13 inches wide and is listed for Renault Alpine.
On the BBS RS166, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 60 mm centre bore decides whether you need hub-centric rings.
The BBS RS166 has a low ET-48 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 335-375 mm are the usual match for a 13-inch rim.
Before fitting a 15-inch BBS RS166, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS166 multi-piece build: lip 7", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS166 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS166 | 4x100 | 15 | 13 | -48 | 60 | 7" | 5.5" | Renault Alpine | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit