
BBS RS series
BBS RS227
- Size6.5x15"
- PCD4x108
- OffsetET32
- Centre bore65 mm
- Lip5/8"
- Barrel5.5"
BBS RS227 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 6.5 inches wide and is listed for Saab 9000.
The 4x108 bolt pattern of the BBS RS227 is the one used by Ford, Peugeot and Citroën; the 65 mm centre bore decides whether you need hub-centric rings.
An offset of ET32 puts the BBS RS227 in the usual range for European saloons of its era. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.
Before fitting a 15-inch BBS RS227, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS227 multi-piece build: lip 5/8", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS227 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS227 | 4x108 | 15 | 6.5 | 32 | 65 | 5/8" | 5.5" | Saab 9000 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit