BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS261

  • Size9x17"
  • PCD5x114.3
  • OffsetET20
  • Centre bore66 mm
  • Lip1.5"
  • Barrel7"

This page covers the BBS RS261, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 9J x 17 and is listed for Nissan Skyline 2,6l 89 GT-R HA.

The 5x114.3 bolt pattern of the BBS RS261 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.

An offset of ET20 puts the BBS RS261 in the usual range for European saloons of its era. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 17 inches, the BBS RS261 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS261 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS261 and its siblings, their construction and buying tips.

Specifications

BBS RS261 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2615x114.317920661.5"7"Nissan Skyline 2,6l 89 GT-R HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models