
BBS RS series
BBS RS264
- Size7x17"
- PCD5x114.3
- OffsetET45
- Centre bore60 mm
- Lip0.5"
- Barrel6"
BBS RS264 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 7x17 inches and is listed for Toyota Soarer, Mark II 2l+3l.
On the BBS RS264, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
ET45 is a high offset for the BBS RS264, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 17-inch BBS RS264, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS264 multi-piece build: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS264 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS264 | 5x114.3 | 17 | 7 | 45 | 60 | 0.5" | 6" | Toyota Soarer, Mark II 2l+3l | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit