BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS282

  • Size7x16"
  • PCD5x114.3
  • OffsetET35
  • Centre bore66 mm
  • Lip1"
  • Barrel5.5"

This page covers the BBS RS282, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7J x 16 and is listed for Nissan Infinity Q 45.

On the BBS RS282, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS282, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 16-inch BBS RS282, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS282: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS282, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS282 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2825x114.316735661"5.5"Nissan Infinity Q 45—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models