
BBS RS series
BBS RS299
- Size8x17"
- PCD5x114.3
- OffsetET45
- Centre bore60 mm
- Lip0.5"
- Barrel7"
This page covers the BBS RS299, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 17-inch wheel, 8 inches wide and is listed for Toyota Celsior VA.
The 5x114.3 bolt pattern of the BBS RS299 is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
ET45 is a high offset for the BBS RS299, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting a 17-inch BBS RS299, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS299 multi-piece build: lip 0.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS299 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS299 | 5x114.3 | 17 | 8 | 45 | 60 | 0.5" | 7" | Toyota Celsior VA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit