BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS323

  • Size9x16"
  • PCD5x114.3
  • OffsetET40
  • Centre bore60 mm
  • Lip1"
  • Barrel7.5"

BBS RS323 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 9x16 inches and is listed for Toyota Soarer 91.

The 5x114.3 bolt pattern of the BBS RS323 is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

At ET40 the BBS RS323 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 16 inches, the BBS RS323 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS323 multi-piece build: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS323, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS323 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3235x114.316940601"7.5"Toyota Soarer 91—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models