
BBS RS series
BBS RS333
- Size9x17"
- PCD5x114.3
- OffsetET42
- Centre bore64 mm
- Lip1"
- Barrel7.5"
BBS RS333 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 17-inch wheel, 9 inches wide and is listed for Honda NSX HA.
On the BBS RS333, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 64 mm centre bore decides whether you need hub-centric rings.
At ET42 the BBS RS333 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 17 inches, the BBS RS333 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS333: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS333 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS333 | 5x114.3 | 17 | 9 | 42 | 64 | 1" | 7.5" | Honda NSX HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit