BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS346

  • Size7x16"
  • PCD5x114.3
  • OffsetET42
  • Centre bore60 mm
  • Lip0.5"
  • Barrel6"

The BBS RS346 belongs to the classic three-piece RS family. It is a 16-inch wheel, 7 inches wide.

The 5x114.3 bolt pattern of the BBS RS346 is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

ET42 is a high offset for the BBS RS346, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 16-inch BBS RS346, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS346: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The fitment of the BBS RS346 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS346, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS346 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3465x114.316742600.5"6"——

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models