
BBS RSII series
BBS RS733
- Size8x17"
- PCD5x114.3
- OffsetET36
BBS RS733 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x17 inches.
On the BBS RS733, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
At ET36 the BBS RS733 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 17-inch BBS RS733, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: stern.
The centre bore and fitment of the BBS RS733 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS733 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS733 | 5x114.3 | 17 | 8 | 36 | — | — | — | — | stern |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit