
BBS RSII series
BBS RS738
- Size10x17"
- PCD5x114.3
- OffsetET52
BBS RS738 is a part number from the RS II, the two-piece successor to the original RS. It measures 10x17 inches.
On the BBS RS738, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
ET52 is a high offset for the BBS RS738, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 17 inches, the BBS RS738 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: stern.
No centre bore or fitment figure is recorded for the BBS RS738. Read the markings on the back of the wheel before relying on it.
The BBS RSII overview covers the background of the BBS RS738 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS738 | 5x114.3 | 17 | 10 | 52 | — | — | — | — | stern |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit